XRDS = X-Band Radar Detection System
Manufacturer = DMT, LLC (Detection Monitoring Technologies)
Warranty = 1 year Limited Warranty

XDRS with thermal camera on top. This is shown mounted on a shock mount on a trailer mast.

The XRDS radar is designed for both land and seaside security. This solid-state system computes the average Doppler (moving) signatures of the environment and intruders. The Doppler signature of an intruder (person, or vessel, or vehicle) differs significantly from that of the environment. This ability to differentiate permits the radar to remove the environmental noise and scatter for optimum performance. The radar comes with a mounting hole pattern on top for equipment (such as cameras) to be mounted on top. DMT has made this radar to be maintenance free for more than 4 years.

For airports, order the XRDS-100 to XRDS-300. For distances greater than 6 km over land or 10 km over water, order the XRDS-300.   For drone detection, order the -300, -400, or -800 model.

Transmitted Frequency X-Band, 9.25 GHz
Peak Radiated Power 100 Watts  (Optional 200 to 800 Watts)
Average Power Maximum 0.4 Watts (100 Watt model)
Antenna Beamwidth 3 degrees x 7 degrees (azimuth x elevation)
Scanning Standard Configuration: continuous 360 degrees rotationSector Scanning (1 to 360 degrees)Scripted Scanning (sets min and max range versus azimuth in 1 degree increments)
Scan Rate 24 RPM (variable from 1 to 24 – system automatically sets spin speed for optimal coverage)
Bandwidth 1-5 MHz(selected via dip switches)
Pulse Repetition Frequency 4 kHz (8 kHz for airports, with more available)
Range Resolution 0.75 – 6 meters
Range Accuracy 1.5 – 6 meters
Range Scales 24 settings up to 43 km
Detection Performance Approximately 3 km for small objects (like humans or kayaks) with 100 W amp model. Longer ranges for cars and boats. In excess of 12 km for human with 800 Watt model.
  • TCP/IP connections via RJ/45 connector.
  • Fiber and wireless available using the DMT DCPM
  • DMT security protocol and NMEA 0183 formats
  • Links detections together to form numbered tracks
  • LAT/LON coordinates provided
  • Useful for 3rd party trackers
Operating Temperature -40 to +65 degrees C
Power Requirements
  • 24 VDC
  • AC (autosensing 110/220 V)—requires DMT’s DCPM.
  • Power consumed: 150 Watts
Size 42 W x 20H inches
Weight Radar: 125 lbs.DCPM (AC power, camera & communication module): 60 lbs.(Includes cable weight for up to a 30 foot length).Pole Mounted Bracket: 36 lbs.
Internal Operating System Windows 7 Embedded
User Interface Operating Standard Windows Platform running Windows 7, 8, 10
User Interface Software

Use DMT’s Remote Client Interface.Also works with many available maritime interfaces

  • Opens as a Windows standard software interface
  • Map, drawing or aerial image/photo overlay of data
  • Rohn 45G tower mounts
  • Schedule 80, 8-inch pole mount
  • Custom mounts are available, but delivery times vary
Radomes Material: NOMEX with Cardinal coatings to protect against oil, gas, solvents, saltwater, UV, and abrasion.Colors: White, Sand, Green, Gray (default)Radome is attached via stainless steel ¼-inch hardware.¼-20 threaded hole pattern on top for mounting hardware. Weight limit is 125 lbs.

DMT provides bayonet style connectors that feed power and all signals.

    • Weatherproof connectors
    • RJ/45 Connector
    • Twist-on Power and RJ/45 connector
MTBF: >4 years.
Required Maintenance: Occasional radome cleaning. Belt replacement recommended after 2 years.
GPS Embedded GPS